Engine - GM (19433063)
Genuine OEM GM Engine - 19433063
Engine - GM (19433063)
Genuine OEM GM Engine - 19433063
- GM
- 19433063
- 12682080, 19370671, 19418256
Details
- Brand:
- SKU:
19433063
- Description:
E-ROD SYSTEMS HAVE IT ALL
Each E-ROD crate engine system carries an official California Air Resources Board (CARB) E.O. number and includes complete emissions equipment, along with the engine controller and harness needed to get the engine running. The primary elements of each kit include:- Chevrolet Performance crate engine
- Engine control module
- Exhaust manifolds
- Catalytic converters
- Mass airflow sensor and sensor boss
- Oxygen sensors and sensor bosses
- Air filter
- Accelerator pedal
- Evaporative emissions canister
- Instruction manual
- CARB EO#: (PENDING)
- Horsepower: 455 @ 6,000 rpm
- Torque: 465 lb.-ft. @ 4,600 rpm
INSTALLATION NOTES
Engines shipped with high-pressure direct-injection fuel pump installed
Assembly does not include any electronics
Kit includes electronic throttle pedal, which is required for throttle input to the ECU
Intended for pre-1995 street vehicles or any off-road vehicle
Not intended for marine applications
Front-End Accessory Drive Kit can be ordered separately
8-bolt crankshaft flange
Shipped with 14" flexplate
BUILDER'S NOTE
To facilitate a complete E-ROD installation, the builder will need to source additional components to complete the assembly and get the vehicle running, including:- Fuel tank
- Fuel lines (re-circulating or returnless)
- Fuel pump - 58 psi (400 kPa) for LC9 and LS3 or 65 psi (450 kPa) for LSA
- Fuel tank vent line from the tank to the evaporative emissions canister
- Purge line from the canister to the engine purge solenoid
- Air induction system that incorporates the mass airflow sensor
- Exhaust system behind the catalytic converters.
Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.
E-ROD systems do not come with a transmission. Chevrolet Performance recommends the SuperMatic(TM) 4L70-E - P/N 19244043 - four-speed automatic overdrive transmission, along with Chevrolet Performance's SuperMatic(TM) transmission controller P/N 19257634, for LC9 and LS3 systems. The LSA, with higher torque output, should use the SuperMatic(TM) 4L85-E, P/N 19300175, along with the SuperMatic(TM) transmission controller, P/N 19302410.
*GM automatic transmissions are typically equipped with 40-tooth reluctor wheels for vehicle speed sensor output. GM late-model manual transmissions are typically equipped with a 17-tooth reluctor wheel. The Chevrolet Performance T56 Super Magnum six-speed manual (P/N 19329795) is equipped with a 40-tooth reluctor wheel.
You May Also Like
Bell Housing Kit LS and LT Engines
$860.52
Clutch Kit LS/LT Engines (8-Bolt Crank)
$1,714.42
LT1 Aluminum Automatic Bell Housing
$176.90 - Replaces:
12682080, 19370671, 19418256
- MSRP: $15,647.84
- Discount: $2,641.73 (16.9% off)
- Sale Price: $13,006.11
- GM
- 19433063
- 12682080, 19370671, 19418256
Details
- Brand:
- SKU:
19433063
- Description:
E-ROD SYSTEMS HAVE IT ALL
Each E-ROD crate engine system carries an official California Air Resources Board (CARB) E.O. number and includes complete emissions equipment, along with the engine controller and harness needed to get the engine running. The primary elements of each kit include:- Chevrolet Performance crate engine
- Engine control module
- Exhaust manifolds
- Catalytic converters
- Mass airflow sensor and sensor boss
- Oxygen sensors and sensor bosses
- Air filter
- Accelerator pedal
- Evaporative emissions canister
- Instruction manual
- CARB EO#: (PENDING)
- Horsepower: 455 @ 6,000 rpm
- Torque: 465 lb.-ft. @ 4,600 rpm
INSTALLATION NOTES
Engines shipped with high-pressure direct-injection fuel pump installed
Assembly does not include any electronics
Kit includes electronic throttle pedal, which is required for throttle input to the ECU
Intended for pre-1995 street vehicles or any off-road vehicle
Not intended for marine applications
Front-End Accessory Drive Kit can be ordered separately
8-bolt crankshaft flange
Shipped with 14" flexplate
BUILDER'S NOTE
To facilitate a complete E-ROD installation, the builder will need to source additional components to complete the assembly and get the vehicle running, including:- Fuel tank
- Fuel lines (re-circulating or returnless)
- Fuel pump - 58 psi (400 kPa) for LC9 and LS3 or 65 psi (450 kPa) for LSA
- Fuel tank vent line from the tank to the evaporative emissions canister
- Purge line from the canister to the engine purge solenoid
- Air induction system that incorporates the mass airflow sensor
- Exhaust system behind the catalytic converters.
Chevrolet Performance recommends the LS1 Engine Installation Guide P/N 88959384, which illustrates basic procedures and offers helpful tips on installing an LS engine into older vehicles.
E-ROD systems do not come with a transmission. Chevrolet Performance recommends the SuperMatic(TM) 4L70-E - P/N 19244043 - four-speed automatic overdrive transmission, along with Chevrolet Performance's SuperMatic(TM) transmission controller P/N 19257634, for LC9 and LS3 systems. The LSA, with higher torque output, should use the SuperMatic(TM) 4L85-E, P/N 19300175, along with the SuperMatic(TM) transmission controller, P/N 19302410.
*GM automatic transmissions are typically equipped with 40-tooth reluctor wheels for vehicle speed sensor output. GM late-model manual transmissions are typically equipped with a 17-tooth reluctor wheel. The Chevrolet Performance T56 Super Magnum six-speed manual (P/N 19329795) is equipped with a 40-tooth reluctor wheel.
You May Also Like
Bell Housing Kit LS and LT Engines
$860.52
Clutch Kit LS/LT Engines (8-Bolt Crank)
$1,714.42
LT1 Aluminum Automatic Bell Housing
$176.90 - Replaces:
12682080, 19370671, 19418256
Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Chevy Parts Pros
ChevyPartsPros.com is dedicated to extending our customer-focused culture to online parts customers worldwide. As specialists in official genuine GM & Chevrolet Parts, we offer a robust catalog backed by a full manufacturer warranty, ensuring you receive only the highest quality parts and accessories for your Chevy vehicles. Our commitment to customer satisfaction is reflected in our VIN verification service for perfect part fitment, a generous 30-day return window, and a secure shopping environment with advanced encryption technology. Our goal is to be your premier destination for a lifetime of Chevy parts needs, embodying a customer-centric approach to e-commerce that is driven by our passion for fitting Chevy vehicles with the best.
Chevrolet | GM | GMC | Cadillac | Hummer | Pontiac | Saturn
